WiFi Router 4G Dual Sim chuyên dụng công nghiệp Teltonika RUTX12

Teltonika RUTX12 - WiFi Router 4G Dual Sim chuyên dụng công nghiệp
Liên hệ
  • Model: RUTX12
  • Hãng sản xuất: Teltonika
  • Hỗ trợ tốc độ kết nối 4G LTE CAT 6 lên đến 300MbpsHỗ trợ tốc độ kết nối 3G lên đến 42Mbps
  • Hỗ trợ 2 SIM và có thể hoạt động đồng thời 2 SIM
  • WiFi chuẩn Wave2 802.11ac
  • 1 port WAN (10/100/1000Mbps) Ethernet
  • 4 port LAN (10/100/1000Mbps) Ethernet
  • 4 LTE Antenna loại SMA connector
  • 2 WiFi Antenna loại RP-SMA connector
  • Bảo hành: 12 tháng
Mua Ngay

Tham khảo sản phẩm khác

Bạn chưa tìm được sản phẩm ưng ý? Xem thêm

Giới thiệu sản phẩm

Teltonika RUTX12 là bộ định tuyến Router WiFi 4G Dual công nghiệp Dual LTE Cat 6 mạnh nhất được thiết kế cho các ứng dụng quan trọng.

Teltonika RUTX12: Hai modem LTE Cat 6 hoạt động đồng thời cung cấp tốc độ lên đến 600 Mbps với tính năng cân bằng tải, cho phép sử dụng nhiều nguồn WAN đồng thời để tăng thông lượng kết nối
Teltonika RUTX12: Cổng 5 x Gigabit Ethernet, Wi-Fi băng tần kép Wave-2 802.11ac với tốc độ truyền dữ liệu lên đến 867 Mbps, Bluetooth LE và giao diện USB và SIM kép giúp thiết bị này không thể thay thế được trong các ứng dụng không phải là tùy chọn mất kết nối.
Teltonika RUTX12: Được đóng gói với các tính năng bảo mật nâng cao như theo dõi VPN, IPsec, PPTP, L2TP, Stunnel và GNSS, Hệ thống vệ tinh dẫn đường toàn cầu cho các dịch vụ định vị và đồng bộ hóa thời gian.
Nhà sản xuất: Teltonika Networks
Teltonika RUTX12:được thiết kế, sản xuất, lắp ráp tại Lithuania.
Teltonika RUTX12 có xuất xứ: Lithuania
Teltonika RUTX12 được chứng nhận Made in Europe

Các tính năng chính của Teltonika RUTX12:

Teltonika RUTX12, Router wifi 4G với các cổng giao tiếp chính
Teltonika RUTX12, Router wifi 4G với các cổng giao tiếp chính

Video giới thiệu Teltonika RUTX12, Router WiFi 4G Dual công nghiệp

Xem thêm

Đánh giá WiFi Router 4G Dual Sim chuyên dụng công nghiệp Teltonika RUTX12

5 0% | 0 đánh giá
4 0% | 0 đánh giá
3 0% | 0 đánh giá
2 0% | 0 đánh giá
1 0% | 0 đánh giá
Đánh giá ngay
Đánh giá WiFi Router 4G Dual Sim chuyên dụng công nghiệp Teltonika RUTX12
Gửi ảnh chụp thực tế
0 ký tự (tối thiểu 10)
    +

    Lưu ý: Để đánh giá được duyệt, quý khách vui lòng tham khảo Hỗ trợ

    Chưa có đánh giá nào.

    Chưa có bình luận nào

    Thông số kỹ thuật

    Model RUTX12
    MOBILE
    Mobile module 2 x 4G (LTE) – Cat 6 up to 300 Mbps, 3G – up to 42 Mbps
    SIM/mobile module switch 2 SIM cards, one for each mobile module, auto switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail
    Status Signal strength, SINR, RSRP, RSRQ, Bytes sent/received, connected band, carrier aggregation, IMSI, ICCID, Mobile module in use
    SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS auto replay
    Black/White list Operator black/white list
    Multiple PDN Possibility to use different PDNs for multiple network access and services
    Band management Band lock, Used band status display
    APN Auto APN
    Bridge mode Direct connection (bridge) between mobile ISP and device on LAN
    WIRELESS
    Wireless mode 802.11 b/g/n/ac Wave 2 (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
    WiFi security WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
    ESSID ESSID stealth mode
    WiFi users up to 150 simultaneous connections
    Wireless Hotspot Captive portal (Hotspot), internal/external Radius server, built in customizable landing page
    ETHERNET
    WAN 1 x WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
    LAN 4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX
    BLUETOOTH
    Bluetooth 4.0 Bluetooth low energy (LE) for short range communication
    NETWORK
    Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)
    Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake on LAN (WOL), DLNA
    VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
    Connection monitoring Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection
    Firewall Port forwards, traffic rules, custom rules
    DHCP Static and dynamic IP allocation, DHCP Relay, Relayd
    QoS / Smart Queue Management (SQM) Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
    DDNS Supported >25 service providers, others can be configured manually
    Network backup VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as an automatic Failover
    Load balancing Balance Internet traffic over multiple WAN connections
    SSHFS Possibility to mount remote file system via SSH protocol
    SECURITY
    Authentication Pre-shared key, digital certificates, X.509 certificates
    Firewall Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
    Attack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
    VLAN Port based and tag based VLAN separation
    Mobile quota control Custom data limits for both SIM cards
    WEB filter Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
    Access control Flexible access control of TCP, UDP, ICMP packets, MAC address filter
    VPN
    OpenVPN Multiple clients and a server can run simultaneously, 12 encryption methods
    OpenVPN Encryption DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
    IPsec IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
    GRE GRE tunnel
    PPTP, L2TP Client/Server instances can run simultaneously, L2TPv3 support
    Stunnel Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
    DMVPN Method of building scalable IPsec VPNs
    SSTP SSTP client instance support
    ZeroTier ZeroTier VPN client support
    WireGuard WireGuard VPN client and server support
    MODBUS
    MODBUS TCP SLAVE
    ID filtering Respond to one ID in range [1;255] or any
    Allow remote access Allow access through WAN
    Custom registers MODBUS TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend MODBUS TCP slave functionality
    MODBUS TCP MASTER
    Supported functions 01, 02, 03, 04, 05, 06, 15, 16
    Supported data formats 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
    MQTT GATEWAY
    Gateway Allows sending commands and receiving data from MODBUS Master through the MQTT broker
    DNP3
    Supported modes TCP Master, DNP3 Outstation
    DATA TO SERVER
    Protocols HTTP(S), MQTT, Azure MQTT, Kinesis
    MONITORING & MANAGEMENT
    WEB UI HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
    FOTA Firmware update from server, automatic notification
    SSH SSH (v1, v2)
    SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET
    CALL Reboot, Status, Mobile data on/off, Output on/off
    TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
    MQTT MQTT Broker, MQTT publisher
    SNMP SNMP (v1, v2, v3), SNMP trap
    JSON-RPC Management API over HTTP/HTTPS
    MODBUS MODBUS TCP status/control
    RMS Teltonika Remote Management System (RMS)
    IoT PLATFORMS
    Clouds of things Allows monitoring of: Device data, Mobile data, Network info, Availability
    ThingWorx Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
    Cumulocity Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP
    Azure IoT Hub Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server
    SYSTEM CHARACTERISTICS
    CPU Quad-core ARM Cortex A7, 717 MHz
    RAM 256 MB, DDR3
    FLASH storage 256 MB, SPI Flash
    FIRMWARE / CONFIGURATION
    WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup
    FOTA Update FW/configuration from server
    RMS Update FW/configuration for multiple devices at once
    Keep settings Update FW without losing current configuration
    FIRMWARE CUSTOMIZATION
    Operating system RutOS (OpenWrt based Linux OS)
    Supported languages Busybox shell, Lua, C, C++
    Development tools SDK package with build environment provided
    LOCATION TRACKING
    GNSS GPS, GLONASS, BeiDou, Galileo and QZSS
    Coordinates GNSS coordinates via WebUI, SMS, TAVL, RMS
    NMEA NMEA 0183
    Server software Supported server software: TAVL, RMS
    Geofencing Configurable multiple geofence zones
    USB
    Data rate USB 2.0
    Applications Samba share, USB-to-serial
    External devices Possibility to connect external HDD, flash drive, additional modem, printer
    Storage formats FAT, FAT32, NTFS
    INPUT/OUTPUT
    Input 1 x Digital Input, 0 – 6 V detected as logic low, 8 – 30 V detected as logic high
    Output 1 x Digital Output, Open collector output, max output 30 V, 300 mA
    Events SMS, Email, RMS
    I/O juggler Allows to set certain I/O conditions to initiate event
    POWER
    Connector 4 pin industrial DC power socket
    Input voltage range 9 – 50 VDC, reverse polarity protection, voltage surge/transient protection
    PoE (passive) Passive PoE. Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards
    Power consumption Idle: <4 W, Max: <22 W
    PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)
    Ethernet 5 x RJ45 ports, 10/100/1000 Mbps
    I/Os 1 x Digital Input, 1 x Digital Output on 4 pin power connector
    Status LEDs 4 x connection status LEDs, 6 x connection strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1x Power LED, 2 x 2.4G and 5G WiFi LEDs
    SIM 2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, external SIM holders
    Power 1 x 4 pin DC connector
    Antennas 4 x SMA for LTE, 2 x RP-SMA for WiFi, 1 x RP-SMA for Bluetooth, 1 x SMA for GNNS
    USB 1 x USB A port for external devices
    Reset Reboot/User default reset/Factory reset button
    Other 1 x Grounding screw
    PHYSICAL SPECIFICATION
    Casing material Full aluminium housing
    Dimensions (W x H x D) 132 x 44.2 x 95.1 mm
    Weight 540 g
    Mounting options DIN rail (can be mounted on two sides), flat surface placement
    OPERATING ENVIRONMENT
    Operating temperature -40 C to 75 C
    Operating humidity 10 % to 90 % non-condensing

    0

    WiFi Router 4G Dual Sim chuyên dụng công nghiệp Teltonika RUTX12

    Teltonika RUTX12 - WiFi Router 4G Dual Sim chuyên dụng công nghiệp

    Trong kho