Managed Gigabit Switch 24 Port 1G POE + 4 Port 10G SFP PLANET WS-2864PVR
- Thương hiệu: PLANET
- Tình trạng: Mới 100%
- Model: WS-2864PVR
- Cổng:
– 24 10/100/1000BASE-T RJ45 POE
– 4 10G SFP+ - Switching capacity: 28Gbps
- Công suất POE: 400W
- Bảo hành: 24 tháng
-
Sản phẩm đã bao gồm VAT
-
Giá niêm yết chưa bao gồm phí vận chuyển
- [Chuyên gia giải đáp ] Chơi game bị giật nguyên nhân do đâu ?
- Nhiều người gặp phải tình trạng giật và các hiện tượng lag hình ảnh khác…
- Cách khắc phục lỗi alt tab trên máy tính hiệu quả, nhanh chóng
- Nút Alt-Tab có nhiệm vụ vô cùng hữu ích sử dụng khi điều hướng các…
- Build pc đồ hoạ ngân sách thoải mái, không lo chi phí
- Bạn là một người thiết kế đồ họa, chiếc máy tính của bạn cũng được…
- 4 thông số quan trọng cần biết trước khi mua màn hình máy tính
- Với tốc độ phát triển nhanh chóng của công nghệ, mọi người cũng đang cập…
Giới thiệu sản phẩm
Enterprise Wireless Management Solution with PoE
PLANET WS-2864PVR, an enhanced Wireless AP Managed Switch, features Smart AP control, Layer 3 OSPF/static routing and Intelligent PoE capability to enable service providers and IT managers to control all wireless APs at the same time in medium- and large-scale wireless network environments. The WS-2864PVR provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit Switching engine along with 24 10/100/1000BASE-T ports featuring up to 36-watt 802.3at PoE+, and 4 extra 10 Gigabit BASE-X SFP+ fiber slots. This is definitely the best network solution for a quick, safe and cost-effective AP control with Power over Ethernet for enterprises.
Five Steps to Manage AP Cluster within Minutes
The WS-2864PVR offers a user-friendly Web GUI for easy configuration. It features centralized management of PLANET Smart AP series without needing to manually configure each AP for the wireless SSID, radio band and security settings. With a five-step configuration process, different purposes of wireless profiles can be simultaneously delivered to multiple APs or AP groups to minimize deployment time, effort and cost.
Optimizing Wi-Fi Deployment with Floor Maps
Importing your floor maps and locating each AP or AP group according to the field deployment can save your time and cost of on-site support and monitoring. It shows real-time AP status, and its signal heat map is capable of reflecting the actual coverage and helps the administrator to fine-tune the overlapping of the adjacent APs anytime to optimize the wireless network performance.
Maximal Scalability and Compatibility with Various Smart APs
To fulfill various business needs, the WS-2864PVR provides a maximum scalability and is compatible with over 10 models of Smart APs from indoor to outdoor series including ceiling-mount, wall-mount, in-wall, industrial, single-band, dual-band and high-power access points which are able to adapt to different environments.
Smart and Intuitive LCD Control
The intuitive touch panel of the WS-2864PVR with PLANET unique Smart LCD design greatly facilitates the Ethernet PoE PD management of large-scale networks of enterprises, hotels, shopping malls, government buildings and other public areas. With the configurable LCD control, the administrator performs IP configurations, PoE, hardware management, system status monitoring and basic diagnostic test without logging on to the web interface, thus making the management of the system more efficient.
10Gbps Ethernet Uplink for High-volume Transmission
The WS-2864PVR provides greater bandwidth and powerful processing capacity. The WS-2864PVR offers a maximum 40Gbps uplink bandwidth through the four 10Gbps SFP+ ports. In addition, the administrator can flexibly choose the suitable SFP/SFP+ transceiver according to the transmission distance or the transmission speed required to extend the network efficiently.
Unique PoE Management Features
The WS-2864PVR has a built-in L2/L4 Gigabit Switching engine and 24 10/100/1000BASE-T ports featuring 36-watt 802.3at PoE+, with a total power budget of up to 400W for different kinds of PoE applications. It perfectly meets the power requirements of PoE Wi-Fi access points including dual-band or outdoor high-power AP/CPE with high power consumption. As a managed PoE switch for stable and reliable wireless AP operation, the WS-2864PVR features the following intelligent PoE management functions:
- PD alive check
- Scheduled power recycling
- PoE schedule
- PoE usage monitoring
Layer 3 Routing Support
The WS-2864PVR enables the administrator to conveniently boost network efficiency by configuring Layer 3 IPv4/IPv6 VLAN static routing manually, and the OSPFv2 (Open Shortest Path First) settings automatically. The OSPF is an interior dynamic routing protocol for autonomous system based on link state. The protocol creates a database for link state by exchanging link states among Layer 3 switches, and then uses the Shortest Path First algorithm to generate a route table based on that database.
IPv4/IPv6 Dual Stack Management Network
The WS-2864PVR offers IPv4/IPv6 VLAN routing feature which allows to crossover different VLANs and different IP addresses for the purpose of having a highly-secure, flexible management and simpler networking application. With the support for IPv6/IPv4 protocol, and user-friendly management interfaces, the WS-2864PVR is the best choice for system integrators to migrate network infrastructure from the IPv4 to the IPv6 network. It also helps SMBs to step in the IPv6 era with the lowest investment and without having to replace the network facilities even though ISPs establish the IPv6 FTTx edge network.
Optimal Redundant Ring for Faster Recovery of Managed Network
The WS-2864PVR supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, and Spanning Tree Protocol (802.1w RSTP) into customer’s network to enhance system reliability and uptime in harsh environments. In a certain simple ring network, the recovery time could be less than 50ms to quickly bring the network back, thus enabling the management network to keep on operating.
User-friendly Secure Management
For efficient management, the WS-2864PVR is equipped with console, web and SNMP management interfaces. With the built-in web-based management interface, the WS-2864PVR offers an easy-to-use, platform-independent management and configuration facility. The WS-2864PVR supports SNMP and it can be managed via PLANET centralized network management suite or any management software based on the standard SNMP v1 and v2 protocols. For reducing product learning time, the WS-2864PVR offers Cisco-like command via Telnet or console port and customer doesn’t need to learn new command from these switches. Moreover, the WS-2864PVR offers remote secure management by supporting SSHv2, TLSv1.2 and SNMPv3 connection which can encrypt the packet content at each session.
Cybersecurity Network Solution to Minimize Security Risks
The cybersecurity feature included to protect the switch management in a mission-critical network virtually needs no effort and cost to install. Both SSHv2 and TLSv1.2 protocols are utilized to provide strong protection against advanced threats. The network administrator can now construct highly-secure corporate networks with considerably less time and effort than before.
Thông số kỹ thuật
Hardware Specifications WS-2864PVR | |
Copper Ports | 24 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
SFP/mini-GBIC Slots | 4 10GBASE-SR/LR SFP+ interfaces (Port-25 to Port-28) |
Compatible with 1000BASE-SX/LX/BX and 2500BASE-X SFP transceiver | |
PoE Injector Port | 24 ports with 802.3at/af PoE injector function with Port-1 to Port-24 |
Console | 1 x RJ45 serial port (115200 , 8, N, 1) |
DRAM | 512Mbytes |
Flash | 64Mbytes |
Reset Button | < 5 sec: System reboot |
> 5 sec: Factory default | |
Power Requirements | 100~240V AC, 50/60Hz |
Power Consumption (Full Loading) | AC: Max. 488 watts/1665.13 BTU |
DC: Max. 36.6 watts/124.88 BTU | |
ESD Protection | 6KV DC |
EFT Protection | 4KV |
Dimensions (W x D x H) | 440 x 300 x 56 mm, 1.25U height |
Weight | 4675g |
LED | System: |
SYS (Green) | |
AC/PWR (Green) | |
DC (Green) | |
Fan1/2/3 Alert ( Red ) | |
PoE PWR Alert ( Red ) | |
PoE Ethernet Interfaces (Port-1 to Port-24): | |
PoE-in-use (Orange) | |
Ethernet Interfaces (Port-1 to Port-24): | |
1000 LNK/ACT (Green), 10/100 LNK/ACT (Orange) | |
10G SFP+ Interfaces (Port-25 to Port-28): | |
1G/2.5G (Green), 10G (Orange) | |
Switching Specifications | |
Switch Architecture | Store-and-Forward |
Switch Fabric | 128Gbps/non-blocking |
Throughput | 95.23Mpps@ 64Bytes packet |
Address Table | 16K entries, automatic source address learning and aging |
Shared Data Buffer | 32Mbits |
Flow Control | IEEE 802.3x pause frame for full duplex |
Back pressure for half duplex | |
Jumbo Frame | 10KB |
Wireless AP Management | |
Maximum Managed APs | 64 |
Maximum AP Groups | 10 |
Maximum APs per AP Group | 64 |
Wireless Encryption/Security | ■ WEP encryption security |
■ WPA Personal / Enterprise (TKIP / AES) | |
■ WPA2 Personal / Enterprise (TKIP / AES) | |
■ Enterprise Class 802.1x | |
AP Auto Discovery | Supports AP auto discovery |
Dashboard | Summarized system overview includes online AP and activated client number |
SSID/RF Profile | Allows multiple wireless profiles creation and maintenance |
Cluster Management | Allows AP grouping for bulk provisioning and batch upgrading |
Bulk AP Provisioning | Supports bulk AP provisioning with user-defined profiles |
Bulk AP Firmware Upgrade | Supports bulk AP firmware upgrade |
Coverage Heat Map | Enables real signal coverage of managed AP reflecting on the uploaded zone maps |
Status Monitoring | Real-time traffic statistics reporting of AP and activated clients |
Graphical Statistics | Real-time and historical visibility of traffic flow |
Profile Backup/Restore | Provides SSID, radio profile backup/restore |
SSIDs-to-VLANs Mapping | Allows to configure SSIDs-to-VLANs mapping in supported APs |
Supported Access Point Models[*] | |
Indoor AP Series | WDAP-C1800AX |
WDAP-W1200E | |
WDAP-C7210E | |
WDAP-W750E | |
WNAP-W2200UE | |
WDAP-C7200E | |
WNAP-C3220E | |
Outdoor AP Series | WDAP-1800AX |
WDAP-850AC | |
WBS-512AC | |
WBS-202N | |
WBS-502N | |
WAP-552N | |
WAP-252N | |
WDAP-802AC | |
WBS-200N | |
WDAP-702AC | |
WAP-200N | |
WAP-500N | |
WBS-500N | |
WDAP-8350 | |
Remarks [*] | The supported AP models may be changed after a firmware upgrade. |
Power over Ethernet | |
PoE Standard | IEEE 802.3at PoE Plus, PSE |
PoE Power Supply Type | End-span |
PoE Power Output | Per port 54V DC, max. 36 watts |
Power Pin Assignment | End-span : 1/2(-), 3/6(+) |
PoE Power Budget | 400 watts (max.) @ 25 degrees C |
PoE Ability | PD @ 7 watts: 24 units |
PD @ 15.4 watts: 24 units | |
PD @ 30.8 watts: 13 units | |
PoE Management Functions | |
Active PoE device alive detects | Yes |
PoE Power Recycle | Yes, daily or predefined schedule |
PoE Schedule | 4 schedule profiles |
PoE Extend Mode | Yes, max. 160 to 200 meters |
PoE System Management | System PoE Admin control |
Total PoE power budget control | |
Auto power input and PoE budget control | |
PoE Legacy mode | |
Over-temperature threshold alarm | |
PoE usage threshold alarm | |
PoE Port Management | Port Enable/Disable/Schedule |
Port Priority | |
Layer 3 Functions | |
IP Interfaces | Max. 128 VLAN interfaces |
Routing Table | Max. 128 routing entries |
Routing Protocols | IPv4 OSPFv2 |
IPv4 hardware static routing | |
IPv6 hardware static routing | |
Layer2 Management Functions | |
Port Configuration | Port disable/enable |
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection | |
Flow Control disable/enable | |
Port Status | Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status |
Port Mirroring | TX/RX/Both |
Many-to-1 monitor | |
VLAN | IEEE 802.1Q tag-based VLAN, up to 255 VLAN groups |
IEEE 802.1ad Q-in-Q tunneling | |
Private VLAN Edge (PVE) | |
MAC-based VLAN | |
Protocol-based VLAN | |
Voice VLAN | |
MVR (Multicast VLAN Registration) | |
Up to 4K VLAN groups, out of 4095 VLAN IDs | |
Link Aggregation | IEEE 802.3ad LACP (static trunk) |
Supports 14 trunk groups with 4 ports per trunk | |
Spanning Tree Protocol | IEEE 802.1D Spanning Tree Protocol (STP) |
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) | |
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) | |
IGMP Snooping | IGMP (v1/v2/v3) Snooping, up to 255 multicast groups |
IGMP Querier mode support | |
MLD Snooping | MLD (v1/v2) Snooping, up to 255 multicast groups |
MLD Querier mode support | |
Bandwidth Control | Per port bandwidth control |
Ingress: 100Kbps~1000Mbps | |
Egress: 100Kbps~1000Mbps | |
Ring | Support ERPS, complies with ITU-T G.8032 |
Recovery time < 10ms with 3 units | |
Recovery time < 50ms with 16 units | |
QoS | Traffic classification based, strict priority and WRR |
8-level priority for switching | |
Port number | |
802.1p priority | |
802.1Q VLAN tag | |
DSCP/TOS field in IP packet | |
Security Functions | |
Access Control List | IP-based ACL/MAC-based ACL |
Up to 256 entries | |
Security | Port Security |
IP source guard | |
Dynamic ARP inspection | |
Command line authority control based on user level | |
AAA | RADIUS client |
TACACS+ client | |
Network Access Control | IEEE 802.1x port-based network access control |
MAC-based authentication | |
Local/RADIUS authentication | |
Switch Management | |
Basic Management Interfaces | Console; Telnet |
Web browser | |
SNMP v1, v2c; | |
2.4-inch color LCD touch screen | |
Secure Management Interfaces | SSHv2, TLSv1.2, SNMPv3 |
System Management | Firmware upgrade by HTTP protocol through Ethernet network |
Configuration upload/download through HTTP | |
Remote syslog | |
System log | |
LLDP protocol | |
NTP | |
PLANET Smart Discovery Utility | |
Event Management | Remote syslog |
Local system log | |
SMTP | |
SNMP MIBs | RFC 1213 MIB-II |
RFC 2863 IF-MIB | |
RFC 1493 Bridge MIB | |
RFC 1643 Ethernet MIB | |
RFC 2863 Interface MIB | |
RFC 2665 Ether-Like MIB | |
RFC 2737 Entity MIB | |
RFC 2819 RMON MIB (Groups 1, 2, 3 and 9) | |
RFC 2618 RADIUS Client MIB | |
RFC 3411 SNMP-Frameworks-MIB | |
IEEE 802.1X PAE | |
LLDP | |
MAU-MIB | |
Power over Ethernet MIB | |
Standards Conformance | |
Regulatory Compliance | FCC Part 15 Class A, CE |
Standards Compliance | IEEE 802.3 10BASE-T |
IEEE 802.3u 100BASE-TX | |
IEEE 802.3z 1000BASE-SX/LX | |
IEEE 802.3ab 1000BASE-T | |
IEEE 802.3ae 10Gb/s Ethernet | |
IEEE 802.3x flow control and back pressure | |
IEEE 802.3ad port trunk with LACP | |
IEEE 802.1D Spanning Tree Protocol | |
IEEE 802.1w Rapid Spanning Tree Protocol | |
IEEE 802.1s Multiple Spanning Tree Protocol | |
IEEE 802.1p Class of Service | |
IEEE 802.1Q VLAN tagging | |
IEEE 802.1ad Q-in-Q VLAN stacking | |
IEEE 802.1x Port Authentication Network Control | |
IEEE 802.1ab LLDP | |
IEEE 802.3af Power over Ethernet | |
IEEE 802.3at Power over Ethernet Plus | |
RFC 768 UDP | |
RFC 793 TFTP | |
RFC 791 IP | |
RFC 792 ICMP | |
RFC 2068 HTTP | |
RFC 1112 IGMP v1 | |
RFC 2236 IGMP v2 | |
RFC 3376 IGMP v3 | |
RFC 2710 MLD v1 | |
RFC 3810 MLD v2 | |
RFC 2328 OSPF v2 | |
ITU-T G.8032 ERPS Ring | |
Environments | |
Operating | Temperature: 0 ~ 50 degrees C |
Relative Humidity: 5 ~ 95% (non-condensing) | |
Storage | Temperature: -10 ~ 70 degrees C |
Relative Humidity: 5 ~ 95% (non-condensing) |
Đánh giá Managed Gigabit Switch 24 Port 1G POE + 4 Port 10G SFP PLANET WS-2864PVR
Chưa có đánh giá nào.
Chưa có bình luận nào