Router công nghiệp 3G/4G LTE Teltonika RUT906

Router công nghiệp 3G/4G LTE Teltonika RUT906
Router công nghiệp 3G/4G LTE Teltonika RUT906
Router công nghiệp 3G/4G LTE Teltonika RUT906
Router công nghiệp 3G/4G LTE Teltonika RUT906
Router công nghiệp 3G/4G LTE Teltonika RUT906
Router công nghiệp 3G/4G LTE Teltonika RUT906
Router công nghiệp 3G/4G LTE Teltonika RUT906
Liên hệ
  • Thương hiệu: Teltonika
  • Model: RUT906
  • Tình trạng: Mới 100%
  • Mạng di động: 2 x khe sim; tốc độ hỗ trợ kế nối 4G (LTE) lên đến 150 Mbps (CAT4), 3G lên đến 42 Mbps
  • Wifi: IEEE 802.11b/g/n, Access Point (AP), Station (STA)
  • Ethernet: 4 x 10/100 Ethernet ports: 1 x WAN (configurable as LAN), 3 x LAN
  • Đầu nối ăng-ten: 2 x SMA for LTE, 2 x RP-SMA for Wi-Fi, 1 x SMA for GNSS
  • Giao diện RS232 và RS485 hỗ trợ các kết nối công nghiệp
  • Cổng kết nối khác: 1 x USB,2 x Đầu vào và 2 x Đầu ra trên ổ cắm công nghiệp 10 chân, 1 x Đầu vào kỹ thuật số và 1 x Đầu ra kỹ thuật số trên đầu nối nguồn 4 chân, 1 x SD card (bên trong)
  • Bảo mật: Hỗ trợ VPN và tường lửa bảo vệ dữ liệu
  • Bảo hành: 24 tháng
Mua Ngay

Tham khảo sản phẩm khác

Bạn chưa tìm được sản phẩm ưng ý? Xem thêm

Giới thiệu sản phẩm

Router công nghiệp 3G/4G LTE Teltonika RUT906

Router công nghiệp 3G/4G LTE Teltonika RUT906

Router công nghiệp 3G/4G LTE Teltonika RUT906 cho các ứng dụng IoT công nghiệp, hỗ trợ giao diện nối tiếp RS232 và RS485, MQTT, BACnet, I/O, Ethernet, v.v. Router công nghiệp 3G/4G LTE Teltonika RUT906 này được trang bị GNSS và các tính năng an toàn như Dual SIM, tự động chuyển đổi dự phòng và WAN dự phòng.

Router công nghiệp 3G/4G LTE Teltonika RUT906 được trang bị wifi chuẩn 802.11b/g/n, RUT906 đáp ứng lên đến 100 user kết nối wifi đồng thời,RUT906  với các tiêu chuẩn bảo mật nâng cao như: WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation.

Router công nghiệp 3G/4G LTE Teltonika RUT906 còn hỗ trợ cân bằng lưu lượng truy cập Internet qua nhiều kết nối WAN, RUT906 với các tùy chọn: Wi-Fi WAN, di động, VRRP, có dây (mỗi tùy chọn có thể được sử dụng làm bộ chuyển đổi dự phòng tự động)

Tính năng nổi bật của Router công nghiệp 3G/4G LTE Teltonika RUT906

  • RUT906v với Tốc độ hỗ trợ kết nối 4G (LTE) lên đến 150 Mbps (CAT4), 3G lên đến 42 Mbps.
  • RUT906 Hỗ trợ wifi chuẩn 802.11b/g/n băng thông tối đa 150 Mbps.
  • RUT906 Đáp ứng 100 user kết nối đồng thời, phát xa khoảng cách bán kính lên đến 25m.
  • RUT906 với 2 Slot SIM Card / 1 port WAN (10/100 Mbps) Ethernet /3 port LAN (10/100 Mbps) Ethernet.
  • RUT906 Tự động chuyển sang kết nối dự phòng khả dụng, giữa kết nối mạng WAN (có dây) và các kết nối 4G (không dây).
  • RUT906 Tương thích với Remote management system (RMS) giúp quản lý tập trung nhiều thiết bị Teltonika từ xa.
  • RUT906 Hỗ trợ Digital và Analogue I/O, RS232/RS485, GNSS (GPS), microSD và USB cho phép thực hiện nhiều tình huống triển khai công nghiệp khác nhau.
  • RUT906 Tích hợp nhiều tính năng nâng cao, như Modbus, SNMP, TR-069, NTRIP, MQTT và nhiều dịch vụ VPN.

Xem thêm

Đánh giá Router công nghiệp 3G/4G LTE Teltonika RUT906

5 0% | 0 đánh giá
4 0% | 0 đánh giá
3 0% | 0 đánh giá
2 0% | 0 đánh giá
1 0% | 0 đánh giá
Đánh giá ngay
Đánh giá Router công nghiệp 3G/4G LTE Teltonika RUT906
Gửi ảnh chụp thực tế
0 ký tự (tối thiểu 10)
    +

    Lưu ý: Để đánh giá được duyệt, quý khách vui lòng tham khảo Hỗ trợ

    Chưa có đánh giá nào.

    Chưa có bình luận nào

    Thông số kỹ thuật

    Thương hiệu Teltonika
    Model RUT906
    Tình trạng Mới 100%
    Bảo hành 1 năm
    Kích thước 109.5 x 50 x 100 mm
    Trọng lượng 295 g
    Nhiệt độ hoạt động -40 °C to 75 °C

    Mobile
    Mobile module 4G LTE Cat 4 up to 150 DL/50 UL Mbps; 3G up to 21 DL/5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL kbps
    3GPP Release Release 9
    SIM switch 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
    Status IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
    SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
    USSD Supports sending and reading Unstructured Supplementary Service Data messages
    Black/White list Operator black/white list (by country or separate operators)
    Band management Band lock, Used band status display
    SIM idle protection service When working with devices with two SIM slots, the one not currently in use will remain idle until the device switches to it, meaning that no data is used on the card until then
    When working with devices with two SIM slots, the one not currently in use will remain idle until the device switches to it, meaning that no data is used on the card until then
    SIM PIN code management SIM PIN code management enables setting, changing, or disabling the SIM card’s PIN
    APN Auto APN
    Bridge Direct connection (bridge) between mobile ISP and device on LAN
    Passthrough Router assigns its mobile WAN IP address to another device on LAN

    Wireless
    Wireless mode 802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA)
    Wi-Fi security WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF)
    SSID/ESSID ESSID stealth mode
    Wi-Fi users Up to 100 simultaneous connections
    Wireless Connectivity Features Fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)
    Wireless MAC filter Allowlist, blocklist
    Wireless QR code generator Once scanned, a user will automatically enter your network without needing to input login information
    TravelMate Forward Wi-Fi hotspot landing page to a subsequent connected device

    Ethernet
    WAN 1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX
    LAN 3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

    Network
    Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
    Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN
    VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
    Connection monitoring Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
    Firewall Port forward, traffic rules, custom rules, TTL target customisation
    Firewall status page View all your Firewall statistics, rules, and rule counters
    Ports management View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
    Network topology Visual representation of your network, showing which devices are connected to which other devices
    Hotspot Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes
    DHCP Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
    QoS / Smart Queue Management (SQM) Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
    DDNS Supported >25 service providers, others can be configured manually
    DNS over HTTPS DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS
    Network backup Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
    Load balancing Balance Internet traffic over multiple WAN connections
    SSHFS Possibility to mount remote file system via SSH protocol
    Traffic Management Real-time monitoring, wireless signal charts, traffic usage history
    Port Mirroring Mirroring network traffic on Ethernet ports for monitoring and analysis

    Security
    Authentication Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator
    Firewall Preconfigured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64
    Attack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
    VLAN Port and tag-based VLAN separation
    Mobile quota control Mobile data limit, customizable period, start time, warning limit, phone number
    WEB filter Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
    Access control Flexible access control of SSH, Web interface, CLI and Telnet
    SSL certificate generation Let’s Encrypt and SCEP certificate generation methods

    VPN
    OpenVPN Multiple clients and a server can run simultaneously, 27 encryption methods
    OpenVPN Encryption DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,
    BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
    IPsec XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
    GRE GRE tunnel, GRE tunnel over IPsec support
    PPTP, L2TP Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
    Stunnel Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
    DMVPN Method of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support
    SSTP SSTP client instance support
    ZeroTier ZeroTier VPN client support
    WireGuard WireGuard VPN client and server support
    Tinc Tinc offers encryption, authentication and compression in it’s tunnels. Client and server support.

    BACNET
    Supported connection types RS485, TCP
    Supported modes Router

    OPC UA
    Supported modes Client, Server
    Supported connection types TCP

    DNP3
    Supported modes Station, Outstation
    Supported connection types RS232, RS485, TCP, USB

    MODBUS
    Supported modes Server, Client
    Supported connection types RTU (RS232, RS485), TCP, USB
    Custom registers MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
    Supported data formats 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

    DATA TO SERVER
    Protocol HTTP(S), MQTT, Azure MQTT, Kinesis
    Data to server Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router’s Data to server feature

    MQTT Gateway
    Modbus MQTT Gateway Allows sending commands and receiving data from MODBUS Server through MQTT broker

    DLMS
    DLMS Support DLMS – standard protocol for utility meter data exchange
    Supported modes Client
    Supported connection types RS232, RS485, TCP
    COSEM Allows to scan meter COSEM objects for automatic detection and configuration

    API
    Teltonika Networks Web API (beta) support Expand your device’s possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com

    Monitoring & Management
    WEB UI HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status
    FOTA Firmware update from server, automatic notification
    SSH SSH (v1, v2)
    SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET
    Call Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off
    TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
    MQTT MQTT Broker, MQTT publisher
    SNMP SNMP (v1, v2, v3), SNMP Trap, Brute force protection
    JSON-RPC Management API over HTTP/HTTPS
    RMS Teltonika Remote Management System (RMS)

    IoT Platforms
    ThingWorx Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
    Cumulocity – Cloud of Things Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength. Has reboot and firmware upgrade actions
    Azure IoT Hub Can be configured with Data to Server to send all the available parameters to the cloud. Has Direct method support which allows to execute RutOS API calls on the IoT Hub. Also has Plug and Play integration with Device Provisioning Service that allows zero-touch device provisioning to IoT Hubs
    AWS IoT Core Utility to interact with the AWS cloud platform. Jobs Support: Call the device’s API using AWS Jobs functionality

    System Characteristics
    CPU Mediatek, 580 MHz, MIPS 24KEc
    RAM 128 MB, DDR2
    FLASH storage 16 MB, SPI Flash

    Firmware / Configuration
    WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup
    FOTA Update FW
    RMS Update FW/configuration for multiple devices at once
    Keep settings Update FW without losing current configuration
    Factory settings reset A full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer’s configuration

    FIRMWARE CUSTOMISATION
    Operating system RutOS (OpenWrt based Linux OS)
    Supported languages Busybox shell, Lua, C, C++, and Python, Java in Package manager
    Development tools SDK package with build environment provided
    GPL customization You can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients’ needs
    Package Manager The Package Manager is a service used to install additional software on the device

    Location Tracking
    GNSS GPS. (GLONASS, BeiDou, Galileo and QZSS – under development)
    Coordinates GNSS coordinates via WebUI, SMS, TAVL, RMS
    NMEA NMEA 0183
    NTRIP NTRIP protocol (Networked Transport of RTCM via Internet Protocol)
    Server software Supported server software TAVL, RMS
    Geofencing Configurable multiple geofence zones

    Serial
    RS232 DB9 connector, RS232 (with RTS, CTS flow control), 300 to 115200 baud rate
    RS485 RS485 Full Duplex (4 wires) and Half-Duplex (2 wires), 300-230400 baud rate
    Serial functions Console, Serial over IP, Modem

    USB
    Data rate USB 2.0
    Applications Samba share, USB-to-serial
    External devices Possibility to connect external HDD, flash drive, additional modem, printer, USB-serial adapter
    Storage formats FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4

    Input / Output
    Input 1 x digital dry input (0 – 3 V), 1 x digital galvanically isolated input (0 – 30 V), 1 x analog input (0 – 24 V), 1 x Digital non-isolated input (on 4-pin power connector, 0 – 5 V detected as logic low, 8 – 30 V detected as logic high)
    Output 1 x digital open collector output (30 V, 250 mA), 1 x SPST relay output (40 V, 4 A), 1 x Digital open collector output (30 V, 300 mA, on 4-pin power connector)
    Events Email, RMS, SMS
    I/O juggler Allows to set certain I/O conditions to initiate event

    SD CARD
    Physical size Micro SD (internal)
    Applications Samba share, Storage Memory Expansion, DLNA
    Capacity Up to 2 TB
    Storage Formats FAT32, NTFS, ext2, ext3, ext4

    Power
    Connector 4-pin industrial DC power socket
    Input voltage range 9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max
    PoE (passive) Passive PoE over spare pairs. Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 – 30 VDC
    Power consumption < 2 W idle, < 7 W Max

    Physical Interfaces
    Ethernet 4 x RJ45 ports, 10/100 Mbps
    I/O’s 2 x Inputs and 2 x Outputs on 10-pin industrial socket, 1 x Digital input and 1 x Digital output on 4-pin power connector
    Status LEDs 1 x Bi-color connection status, 5 x Mobile connection strength, 4 x ETH status, 1 x Power
    SIM 2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional – different hardware required; contact your sales manager)
    Power 1 x 4-pin power connector
    Input/output 1 x 10-pin industrial socket for inputs/outputs
    Antennas 2 x SMA for LTE, 2 x RP-SMA for Wi-Fi, 1 x SMA for GNSS
    USB 1 x USB A port for external devices
    RS232 1 x DB9 socket
    RS485 1 x 6-pin industrial socket
    Reset Reboot/User default reset/Factory reset button

    Physical Specification
    Casing material Aluminium housing, plastic panels
    Dimensions (W x H x D) 109.5 x 50 x 100 mm
    Weight 295 g
    Mounting options DIN rail, wall mount, flat surface (all require additional kit)

    Operating Environment
    Operating temperature -40 °C to 75 °C
    Operating humidity 10% to 90% non-condensing
    Ingress Protection Rating IP30

    Regulatory & Type Approvals
    Regulatory CE, UKCA, RCM, CB, E-mark

    EMC Emissions & Immunity
    Standards EN 55032:2015+A11:2020
    EN 55035:2017+A11:2020
    EN 61000-3-3:2013+A1:2019+A2:2021
    EN IEC 61000-3-2:2019+A1:2021
    EN 301 489-1 V2.2.3
    EN 301 489-17 V3.2.4
    EN 301 489-19 V2.2.0
    EN 301 489-52 V1.2.1
    ESD EN 61000-4-2:2009
    Radiated Immunity EN IEC 61000-4-3:2020
    EFT EN 61000-4-4:2012
    CS EN 61000-4-6:2014
    DIP EN IEC 61000-4-11:2020
    Standards CE: EN 62311 CB: IEC 62368-1:2018

    RF
    Standards EN 301 908-1;
    EN 301 908-2;
    EN 301 908-13;
    EN 300 328;

    0

    Router công nghiệp 3G/4G LTE Teltonika RUT906

    Trong kho