Managed Gigabit Switch POE Cisco 8 Port SF352-08MP-K9

Managed Gigabit Switch  POE Cisco 8 Port SF352-08MP-K9
Managed Gigabit Switch  POE Cisco 8 Port SF352-08MP-K9
Managed Gigabit Switch  POE Cisco 8 Port SF352-08MP-K9
Managed Gigabit Switch  POE Cisco 8 Port SF352-08MP-K9
8.280.000 
  • Thương hiệu: CISCO
  • Bảo hành: 12 tháng
  • Tình trạng: Mới 100%
  • Mã sản phẩm: SF352-08MP-K9
  • Dung lượng hàng triệu gói mỗi giây (mpps) (gói 64 byte) 4.17
  • Khả năng chuyển đổi tính bằng gigabit / giây (Gbps) 5.6
  • Cổng: 08 10/100 Mbps PoE ports (Công suất tối đa mỗi port 30W(IEEE 802.3at PoE), Công suất tối đa switch 124W) + 2 Combo mini-GBIC ports.
  • Khung Jumbo: Lên tới 9K (9216) byte
  • Dòng sản phẩm: Cisco 350 Series

Giới thiệu sản phẩm

Managed Switch – Hub POE Cisco SF352-08MP

Cisco SF352-08MP-K9-EU 8-port 10/100 Max-POE Managed Switch

Bộ chuyển mạch Switch Cisco SF352-08MP-K9-EU được thiết kế tối giản đúng như mục đích sử dụng nó với 8 Port RJ45 tốc độ 10/100Mbps. Là loại Switch quản lý cho doanh nghiệp nhỏ SF352-08MP-K9-EU nổi bật với khả năng tự động chuyển chế độ cáp thẳng (MDI/MDI-X) cùng với đó các tính năng địa chỉ học tập và kiểm soát lưu lượng dữ liệu giúp cho việc truyền tải dữ liệu được tối ưu hơn.

Bộ chuyển mạch Switch Cisco SF352-08MP-K9-EU dòng thiết bị chuyển mạch Switch 350 Series chuyên dụng, sản phẩm là giải pháp tối ưu cho các doanh nghiệp nhỏ (Cisco Small Bussiness 350 Series).

Không chỉ vậy, ngoài ra Switch SF352-08MP-K9-EU còn tạo ra sự khác biệt khi mà thiết bị này được thiết kế để có thể phù hợp với cả 3 lớp mạng và kèm theo là khả năng cung cấp nguồn PoE tích hợp luôn trên các cổng mạng của thiết bị.

8 ports 10/100 PoE Managed Switch CISCO SF352-08MP-K9-EU

Hình ảnh: Switch Cisco SF352-08MP-K9-EU chính hãng

Tính năng nổi bật của Switch Cisco SF352-08-K9-EU

Hỗ trợ chuẩn Spanning Tree 802.1d

Hội tụ nhanh bằng cách sử dụng 802.1w (Cây Spanning nhanh [RSTP]), được bật theo mặc định

Hỗ trợ giao thức điều khiển tập hợp liên kết IEEE 802.3ad (LACP)

Hỗ trợ lên đến 4096 VLAN cùng một lúc

Private VLAN Edge (PVE), còn được gọi là cổng được bảo vệ, với nhiều đường lên

VLAN minh bạch qua mạng của nhà cung cấp dịch vụ trong khi cô lập lưu lượng truy cập giữa các khách hàng với tính năng Q-in-Q VLAN

Chuyển tiếp lưu lượng DHCP đến máy chủ DHCP trong VLAN khác nhau; làm việc với DHCP Option 82

IGMP querier được sử dụng để hỗ trợ một tên miền multicast lớp 2 của các thiết bị chuyển mạch snooping trong trường hợp không có bộ định tuyến multicast

Định tuyến Wirespeed của gói IPv4, lên tới 1K tuyến tĩnh và lên tới 128 giao diện IP

Cấu hình giao diện lớp 3 trên cổng vật lý, giao diện LAG, VLAN hoặc giao diện loopback

Chuyển tiếp lưu lượng DHCP trên các miền IP

Hỗ trợ SSL: Mã hóa tất cả lưu lượng HTTPS, cho phép truy cập bảo mật cao vào GUI quản lý dựa trên trình duyệt trong chuyển đổi là một trong những tính năng không thể bỏ qua

Xem thêm

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Managed Gigabit Switch POE Cisco 8 Port SF352-08MP-K9”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

Thông số kỹ thuật

Model SF352-08MP-K9-EU
Port
Total System Ports 8 Fast Ethernet + 2 Gigabit Ethernet
RJ-45 Ports 8 Fast Ethernet
Combo Ports (RJ‑45 + SFP) 2 Gigabit Ethernet combo
Performance
Switching capacity and forwarding rate Capacity in Millions of Packets per Second (mpps) (64-byte packets): 4.17
All switches are wire speed and nonblocking Switching Capacity in Gigabits per Second (Gbps): 5.6
USB slot For file-management purposes
Layer 2 Switching
Spanning Tree Protocol Standard 802.1d Spanning Tree support
Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default
8 instances are supported
Multiple Spanning Tree instances using 802.1s (MSTP)
Port grouping Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP): Up to 8 groups,  Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation
VLAN Support for up to 4096 VLANs simultaneously
Port-based and 802.1Q tag-based VLANs
MAC-based VLAN
Management VLAN
Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks
Guest VLAN
Unauthenticated VLAN
Dynamic VLAN assignment via RADIUS server along with 802.1x client authentication
CPE VLAN
Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS
Auto voice capabilities deliver networkwide zero-touch deployment of voice endpoints and call control devices
Multicast TV VLAN Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs (also known as MVR)
Q-in-Q VLAN VLANs transparently cross a service provider network while isolating traffic among customers
Generic VLAN Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP) Protocols for automatically propagating and configuring VLANs in a bridged domain
Unidirectional Link Detection (UDLD) UDLD monitors physical connection to detect unidirectional links caused by incorrect wiring or cable/port faults to prevent forwarding loops and blackholing of traffic in switched networks
Dynamic Host Configuration Protocol (DHCP) Relay at Layer 2 Relay of DHCP traffic to DHCP server in different VLAN; works with DHCP Option 82
Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 1K multicast groups (source-specific multicasting is also supported)
IGMP Querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router
Head-Of-Line (HOL) blocking HOL blocking prevention
Loopback Detection Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP
Jumbo frames Up to 9K (9216) bytes
Layer 3
IPv4 routing Wirespeed routing of IPv4 packets
Up to 1K static routes and up to 128 IP interfaces
IPv6 routing Wirespeed routing of IPv6 packets
Classless Interdomain Routing (CIDR) Support for CIDR
Layer 3 Interface Configuration of Layer 3 interface on physical port, LAG, VLAN interface, or loopback interface
DHCP relay at Layer 3 Relay of DHCP traffic across IP domains
User Datagram Protocol (UDP) relay Relay of broadcast information across Layer 3 domains for application discovery or relaying of bootP/DHCP packets
DHCP Server Switch functions as an IPv4 DHCP server serving IP addresses for multiple DHCP pools/scopes
Support for DHCP options
Security
Secure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. SCP also uses SSH. SSH v1 and v2 are supported
Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch
IEEE 802.1X (Authenticator role) 802.1X: RADIUS authentication and accounting, MD5 hash; guest VLAN; unauthenticated VLAN, single/multiple host mode and single/multiple sessions
Supports time-based 802.1X
Dynamic VLAN assignment
Web-based authentication Web based authentication provides network admission control through web browser to any host devices and operating systems
STP Bridge Protocol Data Unit (BPDU) Guard A security mechanism to protect the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port
STP Root Guard This prevents edge devices not in the network administrator’s control from becoming Spanning Tree Protocol root nodes
DHCP snooping Filters out DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces. This prevents rogue devices from behaving as DHCP Servers
IP Source Guard (IPSG) When IP Source Guard is enabled at a port, the switch filters out IP packets received from the port if the source IP addresses of the packets have not been statically configured or dynamically learned from DHCP snooping. This prevents IP Address Spoofing
Dynamic ARP Inspection (DAI) The switch discards ARP packets from a port if there are no static or dynamic IP/MAC bindings or if there is a discrepancy between the source or destination addresses in the ARP packet. This prevents man-in-the-middle attacks
IP/MAC/Port Binding (IPMB) The preceding features (DHCP Snooping, IP Source Guard, and Dynamic ARP Inspection) work together to prevent DOS attacks in the network, thereby increasing network availability
Secure Core Technology (SCT) Makes sure that the switch will receive and process management and protocol traffic no matter how much traffic is received
Secure Sensitive Data (SSD) A mechanism to manage sensitive data (such as passwords, keys, and so on) securely on the switch, populating this data to other devices, and secure autoconfig. Access to view the sensitive data as plaintext or encrypted is provided according to the user-configured access level and the access method of the user
Layer 2 isolation Private VLAN Edge (PVE) with community VLAN PVE (also known as protected ports) provides Layer 2 isolation between devices in the same VLAN, supports multiple uplinks
Port security The ability to lock source MAC addresses to ports and limits the number of learned MAC addresses
RADIUS/TACACS+ Supports RADIUS and TACACS authentication. Switch functions as a client
Storm control Broadcast, multicast, and unknown unicast
RADIUS accounting The RADIUS accounting functions allow data to be sent at the start and end of services, indicating the amount of resources (such as time, packets, bytes, and so on) used during the session
DoS prevention Denial-Of-Service (DOS) attack prevention
ACLs Support for up to 512 rules
Drop or rate limit based on source and destination MAC, VLAN ID or IP address, protocol, port, Differentiated Services Code Point (DSCP)/IP precedence, TCP/UDP source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag, time-based ACLs supported
Quality of Service
Priority levels 8 hardware queues
Scheduling Strict priority and Weighted Round-Robin (WRR)
Queue assignment based on DSCP and class of service (802.1p/CoS)
Class of service Port based; 802.1p VLAN priority based; IPv4/v6 IP precedence/Type of Service (ToS)/DSCP based; Differentiated Services (DiffServ); classification and remarking ACLs, trusted QoS
Rate limiting Ingress policer; egress shaping and rate control; per VLAN, per port, and flow based
Congestion avoidance A TCP congestion avoidance algorithm is required to minimize and prevent global TCP loss synchronization
Power over Ethernet (PoE)
802.3af PoE, 802.3at PoE+, and 60W PoE power are delivered over any of the RJ-45 ports within the listed power budgets Switches support 802.3at PoE+, 802.3af, 60W PoE, and Cisco prestandard (older) PoE. Maximum power of 60W to any 10/100 or Gigabit Ethernet port for PoE+ supported devices and 15.4W for PoE supported devices, until the PoE budget for the switch is reached. The total power available for PoE per switch is as follows:
Power Dedicated to PoE: 128W
Number of Ports That Support PoE: 8
PoE powered device and PoE passthrough In addition to AC power, compact switch models can work as PoE powered devices and be powered by PoE switches connected to the uplink ports. The switch can also pass through the power to downstream PoE end devices if required
Maximum of 60W can be drawn per uplink port if the peer PoE switch supports 60W PoE. When multiple uplink ports are connected to PoE switches, the power drawn from these ports is combined
When AC power is connected and functioning properly, it will have priority over the PoE powered device function. The PoE powered device function will then act as a backup power source to the AC power. The PoE powered device function will be the primary power source for the switch if AC power is not connected
Green Power (Mode) Energy Detect
System Power Consumption 110V=10.4W
220V=11.2W
Power Consumption (with PoE) 110V=157.2W
220V=156.2W
Heat Dissipation (BTU/hr) 536.1
Total System Ports 8 Fast Ethernet + 2 Gigabit Ethernet
RJ-45 Ports 8 Fast Ethernet
Combo Ports (RJ‑45 + SFP) 2 Gigabit Ethernet combo + 2 SFP
Buttons Reset button
Cabling type Unshielded Twisted Pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX; UTP Category 5
Ethernet or better for 1000BASE-T
LEDs System, Link/Act, PoE, Speed, LED power saving option
Flash 256 MB
CPU memory 512 MB
Packet buffer All numbers are aggregate across all ports as the buffers are dynamically shared: 1.5 Mb
Environmental
Dimensions 279.4 x 44 x 170 mm
Weight 1.16 kg
Power 100-240V 50-60 Hz, 2.0A, external