Managed Gigabit Switch SFP 28 Port Cisco SG350-28SFP

Managed Gigabit Switch SFP 28 Port Cisco SG350-28SFP
Managed Gigabit Switch SFP 28 Port Cisco SG350-28SFP
Managed Gigabit Switch SFP 28 Port Cisco SG350-28SFP
Managed Gigabit Switch SFP 28 Port Cisco SG350-28SFP
17.500.000 
  • Thương hiệu: CISCO
  • Tình trạng: Mới 100%
  • Mã sản phẩm: SG350-28SFP-K9-EU
  • Cổng giao tiếp: 24 khe cắm SFP Gigabit, 2 Gigabit đồng / SFP combo
  • Dòng sản phẩm: 350
  • Switching capacity and forwarding rate Capacity in Millions of Packets per Second (mpps) (64-byte packets): 41.66
  • All switches are wire speed and nonblocking Switching Capacity in Gigabits per Second (Gbps): 56
  • Bảo hành: 12 tháng

Giới thiệu sản phẩm

Managed Gigabit Switch – Hub SFP Cisco SG350-28SFP

Cisco SG350-28SFP-K9-EU 28-port Gigabit Managed SFP Switch 24 SFP, 2 Gigabit đồng / SFP combo

Chuyển đổi Cisco SG350-28SFP-K9 thuộc dòng sản phẩm Cisco small business 350 series.Thiết bị chuyển mạch mạng Cisco SG350-28SFP-K9 được thiết kế để phù hợp với cả 3 mạng lớp. Switch SG350-28SFP-K9 cung cấp 24 khe cắm SFP Gigabit, 2 Gigabit đồng / SFP combo cho LAN kết nối tại các doanh nghiệp vừa và nhỏ.

Chuyển đổi các khe SFP Gigabit của Switch SG350-28SFP-K9 8, 2 Gigabit đồng / SFP combo.28-Port Gigabit Managed SFP Switch CISCO SG350-28SFP-K9-EU

Hình ảnh: Switch Cisco SG350-28SFP-K9-EU chính hãng

Switch Cisco SG350-28SFP-K9 tự động chuyển đổi chế độ cáp mạng (MDI / MDI-X). Các tính năng Địa chỉ học tập và lão hóa, và kiểm soát lưu lượng dữ liệu giúp tối ưu truyền dữ liệu.Thiết kế cho bàn.

Thiết bị chuyển mạch mạng Switch Cisco chính hãng này là giải pháp thích hợp tối ưu hiệu suất các hệ thống doanh nghiệp vừa và nhỏ hiện nay.

Xem thêm

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Managed Gigabit Switch SFP 28 Port Cisco SG350-28SFP”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

Thông số kỹ thuật

  • Thương hiệu: CISCO
  • Bảo hành: 12 tháng
  • Tình trạng: Mới 100%
  • Model: SG350-28SFP-K9-EU
  • Performance
  • Switching capacity and forwarding rate Capacity in Millions of Packets per Second (mpps) (64-byte packets): 41.66
  • All switches are wire speed and nonblocking Switching Capacity in Gigabits per Second (Gbps): 56
  • Total System Ports 28 Gigabit Ethernet
  • RJ-45 Ports 24 Gigabit Ethernet
  • Up link port 2 Gigabit Ethernet combo
  • Jumbo frames Frame sizes up to 9K bytes. The default MTU is 2K
  • MAC table 64K addresses
  • Layer 2 Switching
  • Spanning Tree Protocol:
    Standard 802.1d Spanning Tree support
    Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default
    8 instances are supported
    Multiple Spanning Tree instances using 802.1s (MSTP)
  • Port grouping: Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP): Up to 8 groups, Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation
  • VLAN:
    Support for up to 4096 VLANs simultaneously
    Port-based and 802.1Q tag-based VLANs
    MAC-based VLAN
    Management VLAN
    Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks
    Guest VLAN
    Unauthenticated VLAN
    Dynamic VLAN assignment via RADIUS server along with 802.1x client authentication
    CPE VLAN
  • Voice VLAN:
    Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS
    Auto voice capabilities deliver networkwide zero-touch deployment of voice endpoints and call control devices
  • Multicast TV VLAN: Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs (also known as MVR)
  • Q-in-Q VLAN: VLANs transparently cross a service provider network while isolating traffic among customers
  • Generic VLAN: Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP) Protocols for automatically propagating and configuring VLANs in a bridged domain
  • Unidirectional Link Detection (UDLD): UDLD monitors physical connection to detect unidirectional links caused by incorrect wiring or cable/port faults to prevent forwarding loops and blackholing of traffic in switched networks
  • Dynamic Host Configuration Protocol (DHCP): Relay at Layer 2 Relay of DHCP traffic to DHCP server in different VLAN; works with DHCP Option 82
  • Internet Group Management Protocol (IGMP): versions 1, 2, and 3 snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 1K multicast groups (source-specific multicasting is also supported)
  • IGMP Querier: IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router
  • Head-Of-Line (HOL): blocking HOL blocking prevention
  • Loopback Detection: Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP
  • Layer 3
  • IPv4 routing Wirespeed routing of IPv4 packets
  • Up to 1K static routes and up to 256 IP interfaces
  • IPv6 routing Wirespeed routing of IPv6 packets
  • Classless Interdomain Routing (CIDR) Support for CIDR
  • Layer 3 Interface Configuration of Layer 3 interface on physical port, LAG, VLAN interface, or loopback interface
  • DHCP relay at Layer 3 Relay of DHCP traffic across IP domains
  • User Datagram Protocol (UDP) relay Relay of broadcast information across Layer 3 domains for application discovery or relaying of bootP/DHCP packets
  • DHCP Server Switch functions as an IPv4 DHCP server serving IP addresses for multiple DHCP pools/scopes
  • Support for DHCP options
  • Security
  • Secure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. SCP also uses SSH. SSH v1 and v2 are supported
  • Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch
  • IEEE 802.1X (Authenticator role) 802.1X: RADIUS authentication and accounting, MD5 hash; guest VLAN; unauthenticated VLAN, single/multiple host mode and single/multiple sessions
  • Supports time-based 802.1X
  • Dynamic VLAN assignment
  • Web-based authentication Web based authentication provides network admission control through web browser to any host devices and operating systems
  • STP Bridge Protocol Data Unit (BPDU) Guard A security mechanism to protect the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port
  • STP Root Guard This prevents edge devices not in the network administrator’s control from becoming Spanning Tree Protocol root nodes
  • DHCP snooping Filters out DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces. This prevents rogue devices from behaving as DHCP Servers
  • IP Source Guard (IPSG) When IP Source Guard is enabled at a port, the switch filters out IP packets received from the port if the source IP addresses of the packets have not been statically configured or dynamically learned from DHCP snooping. This prevents IP Address Spoofing
  • Dynamic ARP Inspection (DAI) The switch discards ARP packets from a port if there are no static or dynamic IP/MAC bindings or if there is a discrepancy between the source or destination addresses in the ARP packet. This prevents man-in-the-middle attacks
  • IP/MAC/Port Binding (IPMB) The preceding features (DHCP Snooping, IP Source Guard, and Dynamic ARP Inspection) work together to prevent DOS attacks in the network, thereby increasing network availability
  • Secure Core Technology (SCT) Makes sure that the switch will receive and process management and protocol traffic no matter how much traffic is received
  • Secure Sensitive Data (SSD) A mechanism to manage sensitive data (such as passwords, keys, and so on) securely on the switch, populating this data to other devices, and secure autoconfig. Access to view the sensitive data as plaintext or encrypted is provided according to the user-configured access level and the access method of the user
  • Layer 2 isolation Private VLAN Edge (PVE) with community VLAN PVE (also known as protected ports) provides Layer 2 isolation between devices in the same VLAN, supports multiple uplinks
  • Port security The ability to lock source MAC addresses to ports and limits the number of learned MAC addresses
  • RADIUS/TACACS+ Supports RADIUS and TACACS authentication. Switch functions as a client
  • Storm control Broadcast, multicast, and unknown unicast
  • RADIUS accounting The RADIUS accounting functions allow data to be sent at the start and end of services, indicating the amount of resources (such as time, packets, bytes, and so on) used during the session
  • DoS prevention Denial-Of-Service (DOS) attack prevention
  • ACLs:
    Support for up to 512 rules
    Drop or rate limit based on source and destination MAC, VLAN ID or IP address, protocol, port, Differentiated Services Code Point (DSCP)/IP precedence, TCP/UDP source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag, time-based ACLs supported
  • Quality of Service
  • Priority levels 8 hardware queues
  • Scheduling Strict priority and Weighted Round-Robin (WRR)Queue assignment based on DSCP and class of service (802.1p/CoS)
  • Class of service Port based; 802.1p VLAN priority based; IPv4/v6 IP precedence/Type of Service (ToS)/DSCP based; Differentiated Services (DiffServ); classification and remarking ACLs, trusted QoS
  • Rate limiting: Ingress policer; egress shaping and rate control; per VLAN, per port, and flow based
  • Environmental
  • Dimensions: 440 x 44 x 257 mm
  • Weight: 2.7 kg