Gigabit Switch Aruba 2930F 48G PoE+ 4SFP JL262A

Gigabit Switch Aruba 2930F 48G PoE+ 4SFP JL262A
Gigabit Switch Aruba 2930F 48G PoE+ 4SFP JL262A
Gigabit Switch Aruba 2930F 48G PoE+ 4SFP JL262A
Gigabit Switch Aruba 2930F 48G PoE+ 4SFP JL262A
48.000.000 
  • Thương hiệu: Aruba
  • Tình trạng: Mới 100%
  • Model: JL262A
  • 48 Cổng Gigabit POE
  • 4 Khe cắm SFP Gigabit
  • Throughput: 77.4 Mpps
  • Routing/Switching capacity: 104 Gbps
  • Bảo hành: 36 tháng

Giới thiệu sản phẩm

Gigabit Switch Aruba 2930F 48G PoE+ 4SFP JL262A

The Aruba 2930F Switch Series is designed for customer creating digital workplaces that are optimized for mobile users with an integrated wired and wireless approach. These basic Layer 3 access switches are easy to deploy and manage with advanced security and network management tools like Aruba ClearPass Policy Manager and Aruba AirWave and are ideal for enterprise edge, SMB and branch offices. A powerful Aruba ProVision ASIC delivers performance and value supporting the latest SDN applications with future proof programmability. It supports 10GbE uplinks, PoE+, robust QoS, and RIP routing.

What’s new

  • Aruba basic Layer 3 switch series with consistent wired/wireless experience with Aruba ClearPass Policy Manager and Aruba Airwave.
  • Convenient built-in 1GbE or 10GbE uplinks.
  • Up to 370 W PoE+ for powering APs, cameras and phones.
  • Ready for innovative SDN applications with OpenFlow support.
  • Simple deployment with Zero Touch Provisioning.

Features

High-Performance Access Layer Switches

The Aruba 2930F Switch Series provides performance, security, and ease of use for enterprise edge, SMB, and branch office networks.

Delivers a consistent wired/wireless user experience with unified management tools such as ClearPass Policy Manager and Airwave Network Management. Provides optimal configuration automatically when connected to Aruba access points for PoE priority, VLAN configuration, and rogue AP containment.

Convenient built-in 1GbE or 10GbE uplinks and PoE+ models deliver right-size network access performance.

Robust basic Layer 3 feature set includes static and RIP routing, ACLs, sFlow, IPv6 with no software licensing required.

Designed with a powerful ProVision ASIC and support for OpenFlow, the Aruba 2930F is ready to take advantage of SDN applications such as HPE Network Visualizer, Optimizer, and Protector Software products.

Performance and Power at the Edge

The Aruba 2930F Switch Series is designed with a powerful Aruba ProVision ASIC, to enable the mobile campus with SDN optimizations, low latency, increased packet buffering, and adaptive power consumption.

Increase performance with selectable queue configurations and associated memory buffering that meets your specific network application requirements.

Supports up to 370 W of internal PoE+ power for wireless access points, cameras and phones.

Security and Quality of Service You Can Rely on

The Aruba 2930F Switch Series includes security and quality of services features to build a network that meets ever-changing corporate policies and compliances while protecting your data from both inside and outside attacks.

Flexible authentication options include standards based security protocols such as 802.1X, MAC and Web Authentication, to enhance security and policy-driven application authentication.

Powerful, multilevel-access security controls include source-port filtering, RADIUS/TACACS+, SSL, Port Security, and MAC address lockout.

Simplify with Integrated Wired/Wireless Management

The Aruba 2930F Switch Series supports Aruba ClearPass Policy Manager for unified and consistent policy between wired and wireless users and simplifies implementation and management of guest login, user onboarding, network access, security, QoS, and other network policies.

Supports Aruba Airwave Network Management software to provide common platform for Zero Touch Provisioning management, and monitoring for wired and wireless network devices.

RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events.

Out-of-band Ethernet management port keeps management traffic segmented from your network data traffic.

Xem thêm

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Gigabit Switch Aruba 2930F 48G PoE+ 4SFP JL262A”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

Thông số kỹ thuật

Aruba ​JL262A
I/O ports and slots 48 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
4 SFP
Additional ports and slots 1 dual-personality (RJ-45 or USB micro-B) serial console port
Physical characteristics Dimensions: 17.42(w) x 11.98(d) x 1.73(h) in (44.25 x 30.42 x 4.39 cm) (1U height)
Weight: 9.83 lb (4.46 kg)
Memory and processor Dual Core ARM Coretex @ 1016 MHz, 1 GB DDR3 SDRAM; Packet buffer size: 12.38 MB 4.5MB Ingress/7.875MB Egress, 4 GB eMMC
Mounting and enclosure Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rack-mounting kit available); Horizontal surface mounting; Wall mounting
Performance 1000 Mb Latency < 3.8 µs (64-byte packets)
Throughut up to 77.4 Mpps
Switching capacity: 104 Gbps
MAC address table size: 32768 entries
Environment Operating temperature: 32°F to 113°F (0°C to 45°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature:-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity:15% to 95% @ 149°F (65°C), noncondensing
Altitude: up to 10,000 ft (3 km)
Acoustic: Power: 55.7 dB, Pressure: 41.7 dB
Electrical characteristics Frequency: 50/60 Hz
Maximum heat dissipation: 1566 BTU/hr (1652.13 kJ/hr)
Voltage: 100 – 240 VAC, rated
Maximum power rating: 459 W
Idle power: 48.6 W
PoE power: 370 W PoE+
Notes: Maximum power rating and maximum heat dissipation are the worst-case theoretical : maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated
Safety UL 60950-1, 2nd Edition; EN 60950-1:2006 +A11:2009 +A1:2010 +A12:2011+A2:2013; IEC 60950-1:2005 +A1:2009 +A2:2013; CSA 22.2 No. 60950-1-07 2nd; EN 60825-1:2007 / IEC 60825-1:2007 Class 1
Emissions EN 55022:2010/CISPR 22 Class A; FCC CFR 47 Part 15 Class A; VCCI Class A; ICES-003 Class A; CNS 13438
Management Aruba AirWave Network Management; IMC – Intelligent Management Center; Command-line interface; Web browser; Configuration menu; SNMP manager; Telnet; RMON1; FTP; Out-of-band management (serial RS-232C or micro USB), aruba switch default enable password, aruba switch configuration guide
Các tính năng hỗ trợ trên switch Aruba ​JL262A
Unified Wired and Wireless Dynamic segmentation
Supports unified wired and wireless policies
Switch auto-configuration
User role
Static IP Visibility
Software-defined networks REST APIs and OpenFlow
Quality of Service (QoS) Traffic prioritization (IEEE 802.1p)
Layer 4 prioritization
Class of Service (CoS)
Rate limiting
Large buffers
Unknown Unicast Rate Limiting
Connectivity Flexible 10 Gb/s Ethernet connectivity
Auto-MDIX
IPv6
IPv6 host
Dual stack (IPv4 and IPv6).
MLD snooping
IPv6 ACL/QoS
IPv6 routing
Security
Performance and efficiency Energy-efficient design delivers power savings
80 PLUS Silver Certified power supply
Energy-efficient Ethernet (EEE) support
Designed with the latest Aruba ProVision ASIC
Selectable queue configurations
Stacking topology
Virtual Switching Framework (VSF) front plane stacking creates one virtual resilient switch from up to eight* switches
Ring topology supports up to an 8-member stack
Virtualized switching provides simplified management as the switches act as a single chassis when stacked
Convergence IP multicast snooping and IGMP
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
LLDP-MED (Media Endpoint Discovery)
IP multicast routing
Local MAC Authentication
Protocol Independent Multicast for IPv6
Resiliency and high availability IEEE 802.1s Multiple Spanning Tree
IEEE 802.3ad link-aggregation-control protocol (LACP) and port trunking
Virtual Router Redundancy Protocol (VRRP)
SmartLink
SNMPv1, v2, and v3
Simplified configuration and management SNMPv1, v2, and v3
Zero-Touch ProVisioning (ZTP)
Flexible management with same hardware
Aruba Central support
Built-in programmable and easy to use REST API interface
Out-of-band Ethernet management port
Manageability Dual flash images
Friendly port names
Find-Fix-Inform
Multiple configuration files
Software updates
RMON, XRMON, and sFlow
Troubleshooting
Uni-Directional Link Detection (UDLD)
IP SLA for voice
Layer 2 switching Jumbo packet support
IEEE 802.1v protocol VLANs
Rapid Per-VLAN Spanning Tree (RPVST+)
GVRP and MVRP
VLAN support and tagging
VxLAN
Layer 3 DHCP server
Static IP routing
256 static and 10,000 RIP route
Routing Information Protocol (RIP)
Access OSPF
Policy-based routing
Security Control Plane Policing set rate limit on control protocols to protect CPU overload from DOS attacks
Multiple user authentication methods
IEEE 802.1X
Web-based authentication
Supports MAC-based authentication
Authentication flexibility
Multiple IEEE 802.1X users per port
Concurrent IEEE 802.1X, Web, and MAC authentication schemes per port
Access control lists (ACLs)
Source-port filtering
RADIUS/TACACS+
Secure shell
Secure Sockets Layer (SSL)
Port security
MAC address lockout
Secure FTP
Switch management logon security
STP BPDU port protection
DHCP protection
Dynamic ARP protection
Dynamic IP lockdown
STP Root Guard
Identity-driven ACL
Per-port broadcast throttling
Private VLAN
Open authentication role
Critical authentication role
MAC pinning
Monitor and diagnostics Digital optical monitoring of SFP+ and 1000BASE-T transceivers